our PRODUCT

All categories
Number of views:
1000

XJ1

It can be used in half wave self - rectifying line for X - ray directional instrument
Product serial number
XJ1
Product description
Parameters
Outline Drawing
Characteristics
Reserve & Transport Condition
Quality Promises After Selling
Maximum operating tube voltage(kV) 30
Filament characteristic(V) Ifmax=4A,Uf=3±1V
Target materials Cu
Target Angle
Weight(≤kg) 2.1
Focal nominal value 6*0.08
Maximum power(0.1s)(kW) 0.15
Note1:The frequency of filament heating power supply is 0~25kHz
Note2:The filament should work normally during the warranty period of the pipe

 

We could not find any corresponding parameters, please add them to the properties table

 

XJ1-0.15/30Cu Shape diagram as shown in figure

 

杭州万东电子有限公司

杭州万东电子有限公司

 

 

1、 The installation or operation of the pipe must be carried out by professionals, and care must be taken during transportation and installation to avoid damaging the pipe.
2、 The compressive strength of oil shall be not less than 35kV/2.5mm as insulation and cooling medium.
3、 The pipe shell shall be cleaned and dried before installation.
4、 After the first use or disuse for more than four weeks, the pipes should be trained as follows before being put into use.From half of the maximum working tube voltage, keep the tube current value under perspective, and rise to the maximum working tube voltage at a speed no more than 5kV/min, stable for 3min.If the tube current is unstable or discharge occurs, the tube voltage should be lowered, and the tube voltage should be increased after stabilization.
5、 Before shutdown, should reduce the tube voltage, then shutdown.

 

Under the condition that the packaged X-ray tubes comply with the storage, transportation and use rules, our company will replace the products for customers free of charge within 12 months from the date of delivery due to manufacturing quality problems.

Previous
Next
logo

这是描述信息

Copyright:Hangzhou Wandong Electron Co., Ltd 浙ICP备05030326号-1  power by:300.cn